Technical Specifications; Camera (Wesvcm 87047 Ser.r3); Power Supply; Monitor (Wesvmn 87047 Ser.r3) - Extel WESV 87047 SER.R3 Guide D'installation Et D'utilisation

« Période » (Period): Length of viewing per camera in auto mode, from 1 to 100 seconds
Note: 0 second deactivates this mode
« Langue » (Language): Language selection (French, English, Spanish, German, Chinese)
«Réintia.» (Reset): Reset parameters to default
5

TECHNICAL SPECIFICATIONS

a. Camera
(WESVCM 87047 SER.R3)
• Reference: 821047
• Alimentation: 12 V
• Sensor: CMOS, infrared additional lighting system
• Lens: 60° fixed angle.
• Resolution: 652 x 582
• Power consumption: 6W max.
Length of cables: Approx. 18 meters
• Operating temperature (approx): -10°C to +55°C.
• IP 65
b. Power supply
• Adapter 100-240 V• • , 50/60Hz ; 12 V , 5A
If the power supply cable has to be cut, ensure that the colour coding of the wires is maintained whenreconnecting
c. Monitor
(WESVMN 87047 SER.R3)
• Reference : 811047
• Screen: 38 cm in diagonal
• Resolution : 1024 X 768
• Power supply: 12 V
• Power consumption: 35 W approx
• Operating temperature (approx): 0°C to +55°C.
• Dimensions (mm) : 367 x 275 x 45
6 OPTION
• Additional cable 20 m (WESVCL 87102)
• Additional cable 50 m (WESVCL 87103)
7

TECHNICAL ASSISTANCE - GUARANTEE

Problems
• no power supply
• no image
If necessary, our technical website is at your disposal www.cfi-extel.com
Last version of the dowloadable manual in color on :
4GB
Causes
• the adapter is not
connected to the power
supply
• The AV cables are not
correctly connected to
the monitor
HOTLINE : 0892-35-00-69 €WWFPLQ
CFI EXTEL WESV 87047 SER.R3 - 06/2011 - V1
Remedies
• Ensure that the adapter is connected to the
electricity supply
• Check that the AV cables are correctly connec-
ted to the monitor
www.cfi-extel.com