Insignia NS-19RTR Guide De L'utilisateur page 45

6 Use the number buttons to enter your access code (password),
then press the ENTER button. If you have not set up an access
code, enter any four numbers (except 4737).
Note
7 Press the
the ENTER button.
8 Press the
ENTER button. You can select:
• 1 [KID SAFE]
• 2 [G]
• 3 [PG]
• 4 [PG13]
• 5 [PGR]
• 6[R]
• 7[NC-17]
• 8[ADULT]
• ALL–Turns off the parental lock.
9 Press the SETUP button.
Changing the access code (password)
To change your access code:
1 Make sure that your DVD combo is in DVD mode.
2 If a disc is playing, press the STOP
3 Press the SETUP button twice.
4 Press the
ENTER button.
5 Press the
ENTER button.
6 Use the number buttons to enter your old access code
(password), then press the ENTER button.
Note
7 Press the
press the ENTER button.
8 Use the number buttons to enter your new access code, then
press the ENTER button to confirm.
9 Press the SETUP button.
44
NS-19RTR 19" DVD Triple Combo
If you forgot your access code, enter
your new access code. The old access code is cleared
and the parental level is set to
or button to select PARENTAL LEVEL
or button to select a rating level, then press the
or button to select CUSTOM
or button to select PARENTAL
If you forgot your access code, enter
your new access code. The old access code is cleared
and the parental level is set to
or button to select PASSWORD CHANGE
www.insignia-products.com
4737
, then enter
ALL
(default).
then press
,
button.
then press the
,
then press the
,
4737
, then enter
ALL
(default).
then
,