Insignia NS-19RTR Guide De L'utilisateur page 43

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To search for a chapter on a DVD or track on an audio CD:
1 During playback, press the MODE button one or more times until
SEARCH appears.
2 Within 60 seconds, use the number buttons to select the chapter,
or track you want. If the DVD or CD has more than ten chapters or
tracks, and you want to select a one-digit chapter or track number,
press 0 then the number. If the DVD or CD has more than ten
chapters or tracks, and you want to select a two-digit chapter or
track, press the +10/+100 button, then enter the chapter or track
number. Playback starts automatically with the chapter or track
you selected.
If you make a mistake, press the CLEAR button and enter the
number again.
Note
3 Press the RETURN button to close the search screen.
To time search:
1 During playback, press the MODE button one or more times until
SEARCH appears.
2 Press the
3 Within 60 seconds, use the number buttons to enter
time you want to skip on the
If you make a mistake, press the CLEAR button and enter the
number again.
4 Press the RETURN button to close the search screen.
To search by markers:
1 During playback, press the MODE button one or more times until
SEARCH appears.
2 Press the
3 Press the
4 When the disc reaches the point you want to mark, press the
ENTER button. The chapter or track number and elapsed time
appear.
5 When you play the disc again, repeat Steps 1 through 3 to select a
marker, then press the ENTER button.
42
NS-19RTR 19" DVD Triple Combo
You can also use the SKIP/REW
FWD/SKIP
button to search for DVD
chapter or CD track.
or
button to select TIME SEARCH
disc. Playback starts automatically.
or
button to select MARKER SEARCH
or
button to select a marker number from 1 to 10.
www.insignia-products.com
or
.
the amount to
.

Publicité

Table des Matières
loading

Table des Matières