EQUATION YAA02E-9HC Notice De Montage - Utilisation - Entretien page 41

FR
3. HOW TO USE
ES
Humidifying box cleaning
PT
EL
PL
RO
11
11
EN
14
14
• Open the humidifying box and take out the water box like Pic
cover like Pic .
12
• Clean the box like Pic .
13
• Put back the water box cover and put the water box back into the humidifying box like
Pic & .
14 15
Note: Do not clean the box with metal brush, it may damage the water box.
INDOOR USE ONLY!
• Install the battery like PIC 16
• Plug the appliance to 220-240V
• Press the power switch
• Unplug the product when it's not in use.
The control system is with following functions:
• With digital LCD to let you know the working situation of the unit.
• Room temperature setting to enable you to set the desired room temperature.
• Room temperature sensor to control the heating of the unit according to your desired
room temperature.
• Digital clock, digital week calendar.
12 13
12 13
15
15
, move off the box
11
50/60Hz socket
80
3. HOW TO USE
Control panel and LCD screen
Control panel:
There are total 5 buttons on the control panel as follows:
— Standby(on / off)
— Temperature, Date and time settings, working program setting(Mode P),
continuous heating mode(Mode M)
— Mode selecting (Program-2000W, Manual in low power-1200W, Manual in
high power-2000W)
Note: Press MODE to set manual or program mode (M or P is displayed on the screen).
In program mode, only 2000W power available.
— Increasing;
— Decreasing;
Pressing or , you can increase or decrease the target temperature directly (in
manual or program mode) while in the main screen
81
FR
ES
PT
EL
PL
RO
EN