Velleman MML16MC Mode D'emploi page 4

8. Type one or more characters
9. Press SHIFT.
You are back in uppercase mode.
10. Press ENTER to display the message.
6.3 Letters with Accents and Diacritic Signs
You can type letters with accents. Let's assume you want to type a ç and an ö.
1. Press Q-PROG.
By default, the letters are in uppercase.
If you want lowercase, press SHIFT.
2. Type the C-key.
3. Press EUROP-CHAR until ç appears.
4. Press any another letter to type normal character.
5. Type the O-key.
6. Press EUROP-CHAR until ö appears.
7. Press any another letter to type normal character.
8. Press ENTER to display the message.
7. Formatting text
7.1 Font colour
You can change the font colour of a message as follows:
1. Press Q-PROG.
The default colour is white.
2. Type a few letters.
These letters will be white.
3. Press COLOR to change the text colour.
Press COLOR multiple times to browse through the colours.
4. Type a few letters.
These next letters will have the other colour.
Repeat
5. Press ENTER to display the message.
7.2 Font size
You can display characters in various LED widths, as follows:
1. Press Q-PROG.
2. Enter a few letters.
3. Press FONT.
The font size changes.
4. Press FONT again to browse through the font sizes (narrow - normal- bold). The size remains active
until you select another one. You can add more characters.
5. Press ENTER to display the message.
7.3 Display a message with special effects
Apart from font colour and size, you can use various effects for a message.
To use these effects, you need to use a page and apply effects to it.
You can program up to 26 pages in the message board.
You can also display a combination of pages.
Programming a page includes the following settings:

I_EFF: incoming animation

STAY: the time the message will stay on the display

SPEED: message speed

MODE: normal or blinking

O_EFF: outgoing animation

PAGE CONTENT: the actual message
To program a page:
V. 02 – 02/07/2014
MML16MC
4 ©Velleman nv