Normal Use; Safety Instructions - Mettler Toledo InTrac 787 Instructions D'utilisation

Masquer les pouces Voir aussi pour InTrac 787:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

InTrac
®
787
2.3

Normal use

The InTrac
specified METTLER TOLEDO 12 mm pH and redox screwcap
electrodes as well dissolved oxygen sensors.
Use the retractable housings solely for this purpose. Usage which
differs from or exceeds this normal usage will be regarded as
usage not for the intended purpose.
The manufacturer/supplier accepts no responsibility for any
damage resulting from such improper usage. The risk is borne
entirely by the user.
Normal use also includes:
– Compliance with the instructions, regulations and informa-
– Adherence to the stipulated inspection and maintenance
– Correct maintenance of the retractable housing.
– Operation with due observance of the stipulated environmen-
2.4

Safety instructions

The retractable housings InTrac
ated, maintained and, if need be, repaired only by personnel
familiar with the housing and who are qualified for such work.
The customer is responsible for ensuring that:
– only trained and authorized personnel work with the
– the operating instructions should be supplemented by in-
– the chain has to be always adjusted to the shortest possible
Ensure that the material specification of your retractable hous-
ing and of the seals satisfies the requirements of the process and
is compatible with the (vessel) cleaning solutions used.
Before every startup, the retractable housing must be checked
for:
– damage to the connections, fastening, etc.
– leaks
A defective retractable housing must neither be installed nor
put into service. If it is suspected that hazard-free operation is
no longer possible (e.g. housing damaged, connections leak-
ing), the retractable housing and the equipment in which the
retractable housing is installed must be shut down and secured
against inadvertent operation.
© 05/10 Mettler-Toledo GmbH, CH - 8606 Greifensee
Printed in Switzerland
®
787 is intended solely for measurement with the
tion in this operating instruction for the InTrac
able housings.
intervals.
tal and operating and the admissible mounting positions.
retractable housings.
house instructions regarding supervisory duties and obliga-
tion to report, work organization, personnel qualification, etc.
length.
787 should be installed, oper-
®
InTrac 787-01-CH
7
®
787 retract-
52 402 481

Publicité

Table des Matières
loading

Table des Matières