Latchways PRD R20 Mode D'emploi page 4

EN
Latchways PRD certificate of conformity
Disclaimer
Every effort has been made to ensure that the information contained within these user
instructions is both accurate and current. As part of Latchways' continuous improvement
programme changes may be made to the product after the publication date. Therefore,
occasionally, the product and these instructions may slightly differ.
Warranty details
Latchways warrants the Latchways PRD, excluding auxiliary components, against defects in
materials and workmanship for one year from the date of the original purchase by the consumer.
Latchways does not warrant against normal wear and tear, nor damage caused by accident or
abuse. If a claim is submitted under warranty, Latchways will either repair, replace or refund
the Latchways PRD at Latchways discretion. Warranty benefits are in addition to any statutory
rights provided under local consumer legislation. Full terms and conditions can be found at
www.latchways.com/warranty.
Date of first use:
Date of first use*
Periodic examination log (page 135)
To be completed by a Competent person at least every 12 months from the date of first
use* and retained.
safety and shall be completed in accordance with Latchways instructions. Latchways
PRD's scheduled for examination shall be withdrawn from service.
A
See completed example below for guidance.
1 2
Date Inspected by (block capitals)
21 10 15 D.HEARSON
dd / mm / yy
*Date of first use shall be administratively provable. Where the date of first use is unknown, then the next previous
administratively provable date shall be used, e.g. date of purchase or date of manufacture.
4
The date the unit is removed from the packaging.
Periodic examinations are an important element for maintaining product
3
Signature
4
Examination completed/comments
PASSED
✓
✓
dd / mm / yy
5
Date of next examination
21 10 1 6
dd / mm / yy