Product Description And Specifications; Intended Use; Product Features - Bosch GCD 12 JL Professional Notice Originale

Do not make any modifications to the laser equip-
u
ment. The setting options described in these operating
instructions can be used safely.
Do not use the laser goggles as protective goggles.
u
The laser goggles make the laser beam easier to see; they
do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while
u
driving. The laser goggles do not provide full UV protec-
tion and impair your ability to see colours.
Warning! If operating or adjustment devices other
u
than those specified here are used or other proced-
ures are carried out, this can lead to dangerous expos-
ure to radiation.
Do not replace the integrated laser with a laser of an-
u
other type. A laser that is not compatible with this power
tool could pose a risk to persons.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Laser radiation
IEC 60825-1:2014
<0.39mW, 650 nm
LASER RADIATION
DO NOT EXPOSE USERS OF
Do not view directly with telescopic
TELESCOPIC OPTICS
CLASS 1M LASER PRODUCT
optical probe
Laser class 1M
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear safety goggles.
Wear a dust mask.
Take note of the dimensions of the saw
blade. The hole diameter must fit the tool
spindle without play.
If it is necessary to use reducers, ensure
that the dimensions of the reducer are
suitable for the base blade thickness and
the saw blade hole diameter, as well as
the tool spindle diameter. Wherever pos-
Bosch Power Tools
Symbols and their meaning
sible, use the reducers provided with the
saw blade.
The saw blade diameter must match the
information specified on the symbol.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for stationary use with saw
blades to make straight cuts with and against the grain, as
well as mitre angles up to 45° in metal materials without the
use of water.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Locking lever
(2) Laser protection cap
(3) Spindle lock
(4) Retracting blade guard
(5) Chip box
(6) Angle guide
(7) Locking spindle
(8) Quick release
(9) Spindle handle
(10) Clamping lever of the saw table extension
(11) Saw table extension
(12) Hex key (6 mm)/cross-headed screwdriver
(13) Clamping handle for mounting the angle guide
(14) Transport safety lock
Protective guard
(15)
(16) Handle
(17) On/off switch
(18) Laser warning label
(19) On/off switch for laser (cutting line indication)
(20) Transport handle
(21) Cover plate
(22) Bracket
(23) Mounting holes
(24) Chip drawer
(25) Saw table
English | 23
1 609 92A 4SP | (26.02.2019)