Whirlpool AMD 385 Mode D'emploi page 35

INSTALLING CASSETTE TYPE
OUTDOOR UNIT
A. Profile Dimensions of Outdoor Unit
A B C
24K 898 295 580 320 345 135
48K 948 338 580 378 413 159
B. Schematic diagram of installation spaces
C. Precautions on Installation of Outdoor Unit
To ensure the unit in proper function, selection of installation location must be in accordance with
following principles:
1. Outdoor unit shall be installed so that the air discharged by outdoor unit will not return and that
sufficient space for repair shall be provided around the machine.
2. The installation site must have good ventilation, so that the outdoor unit can take in and exhaust
enough air. Ensure that there is no obstacle for the air intake and exhaust of the outdoor unit. If there is
any obstacle blocking the air intake or exhaust, remove it.
3. Place of installation shall be strong enough to support the weight of outdoor unit, and it shall be able to
insulate noise and prevent vibration. Ensure that the wind and noise from the unit will not affect your
neighbors.
4. Avoid direct sunshine over the unit. It is better to set up a sun shield as the protection.
5. Place of installation must be able to drain the rainwater and defrosting water.
6. Place of installation must ensure the machine will not be buried under snow or subject to the influence
of rubbish or oil fog.
7. The installation site must be at a place where the air exhaust outlet does not face strong wind.
(Unit: mm)
D E F d
12
15
Cut it off, if the bolts is too
long, or it will be troublesome
of the moving in the future.
35
Beton
Anchor bolt