Sony MDR-1ADAC Guide De Démarrage

Stereo Headphones
Start Guide
Guide de démarrage
Startanleitung
MDR-1ADAC
4-544-744-52(1)
©2014 Sony Corporation Printed in Malaysia
http://www.sony.net/
Manuals supplied
Start Guide (this document)
Provides you with instructions on how to connect the unit with devices and basic operations.
Reference Guide (exhibit document)
Provides you with precautions and product specifications.
GB
FR
DE
English Stereo Headphones
How to use
1
Charging the unit
 Press and hold POWER for about 2 seconds to turn off the unit.

Boot your computer, then connect it to the unit using the micro-USB cable (supplied).
The POWER indicator (red) lights up. Charging is completed in about 4 hours.
When charging is complete, the POWER indicator turns off.
If the battery is not charging properly, the POWER indicator (red) flashes.
2
Turn on the connecting audio device
: Install a driver. (For Mac, there is no need to download and install a driver.)
Computer
• Download and install the driver software for Windows "Sony USB Device Driver" onto a Windows computer.
• When playing High-Resolution Audio format data on your computer with the unit, install "Hi-Res Audio Player."
To download the driver software and "Hi-Res Audio Player."
Visit the following website, and download the driver software.
http://www.sony.eu/support/dna
For details on installing, refer to the website.
3
Select a cable to use and connect the audio device to the unit
Each supplied cable is designed exclusively for each device. Depending on the device used, select one of the supplied cables.
Digital output supported WALKMAN®
WALKMAN®
Digital cable for Walkman®
(supplied)
Other devices
Other devices
Headphone cable
(supplied)
4
Listening to music with the headphones
 Press and hold POWER for about 2 seconds to turn on the unit.
The POWER indicator (green) lights up.
 Start playback on the connected audio device.
 Adjust the volume.
Adjust the volume with the VOL +/– knob on the right headphone.
Help Guide (Operating Instructions)
Read the Help Guide on your computer or smartphone, when you want to know how to use the
unit in greater detail. The Help Guide also contains a troubleshooting guide which provides you
with remedies for the problems you might encounter.
URL:
http://rd1.sony.net/help/mdr/1adac/h_ce/
Two-dimensional code:
Computer
Micro-USB cable (supplied)
Digital output supported Xperia
Xperia
iPhone/iPad/iPod
Digital cable for Xperia Lightning connector cable
(supplied) (supplied)
If you connect an iPhone/iPad/iPod that is not equipped with the
Lighting connector, see "Other devices" in this step.
• If the battery is empty or being charged, the unit can be used by Connect the computer to the unit with the same procedure as "1
connecting the headphone cable to audio devices. Charging the unit."
• When the headphone cable is connected, the unit turns off.
• When the headphone cable is connected, the unit does not turn on.
• While using the unit with the headphone cable, the VOL +/– knob is
not available. Adjust the volume of the connected device.
After using the unit
Press and hold POWER for about 2 seconds to turn off the unit.
iPhone/iPad/iPod
Computer