Garmin GHP 12 Instructions D'installation page 5

Drive Unit Dimensions
Item Description
Distance from the base of the drive-unit mount to the drag link/tiller pin when the rudder is amidships.
➊
Distance from the base of the drive-unit mount to the drag link/tiller pin when the drive unit is fully extended.
➋
Distance of travel to fully port or starboard to when the rudder is amidships.
➌
Maximum stroke distance from fully retracted to fully extended.
➍
notE: Extending beyond this distance will damage the drive unit.
Distance from the base of the drive-unit mount to the drag link/tiller pin when the drive unit is fully retracted.
➎
Relative height of the drive-unit motor from the mounting surface.
➏
Relative height of the drive-unit drag link from the mounting surface.
➐
Class A Drive Unit Installation Instructions
➊
➋
➎
➌
➍
➏
➐
Measurement
31.5 in. (800 mm)
37.28 in. (947 mm)
5.8 in. (147 mm)
11.93 in. (303 mm)
25.71 in. (653 mm)
6.44 in. (163.5 mm)
1.4 in. (35.5 mm)
5