Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.3.2 Display used memory (%), date and time
5.4 Stop recording / create PDF
Connect logger to an USB port. Beeper sounds for
1 second. LED blinks green until result PDF is created
(can take up to 40 seconds).
The symbol ► disappears in the status line. Now the
logger is stopped.
The Logger is shown as removable drive LOG200/
LOG210/ LOG220 / LOG200 TC / LOG210 TC
LOG200 E / LOG220 E
View PDF and save. PDF will be overwritten with next
log start!
Note: With the next recording the Extrema (Max- and Min-value), and the
AVG-value will be reset.
5.4.1 Stop recording by button.
To stop the Logger via button it is necessary to change the configuration by Software
LogConnect. If this setting is done the start button is also the stopp button.
24
After pressing the start button while the logger
is recording, the first line shows MEM and
the second line (line 2) displays the used
memory percentage(%). Afterwards the logger
displays date and time for 2 seconds.
5.5 Description of PDF result file (see Fig. C)
Filename: z.B.
LOG220_16099908_2016-09-27T103123.PDF
LOG220:
Device
A
16099908:
Serial
2016-09-27:
Start of recording (date)
T103123:
time: HHMMSS
Description:
Log run info, edit with LogConnect* software
B
Configuration:
preset parameters
C
Summary:
Overview of measurement results
D
E
Graphics:
Diagram of measured values
F
MOV:
Indicates whether instrument has been
moved (with date and time)
Signature:
Sign PDF if required.
G
X
: Measurement OK
: Measurement failed
H
* Download free LogConnect software:
www.dostmann-electronic.de/home.html ->Downloads ->Software/<your logger>/
Software/LogConnect_XXX.zip (XXX choose latest version)
5.6 USB-Connection
For configuration the instrument has to be connected to the USB-port of your
Computer. For configuration please read the according to chapter and the use the
online direct help of the Software LogConnect.
25
Publicité
Chapitres
Table des Matières
