Power-Save Mode For Display; Windows Software For Log200-Serie; Configuration Software Log Connect; First Start / Start Recording - Dostmann Electronic LOG200 Série Mode D'emploi

5.2.1.1 Power-Save Mode for Display

The Power-Save Modes is activated as a standard. The display switches off when
for 2 minutes no button has been pressed or the instrument has been not moved.
The logger is still active, only the display is switched off. The internal clock runs.
Moving the logger will reactivate the display.
5.2.2 Windows Software for Log200-Series
The instruments of series Log200 are already preset and ready for start. It can be used
without any software! However, there is a Windows Application free for downloading.
Please note the free-to-use link:
see below 5.2.2.1 Configuration Software Log Connect

5.2.2.1 Configuration Software Log Connect

By this software the user can change configuration parameter like measuring
interval, start delay(or other start parameter), creating alarm levels or chan-
ging the internal clock time The Software Log Connect contains an online help.
Download free LogConnect software:
www.dostmann-electronic.de/home.html ->Downloads ->Software/<your logger>/
Software/LogConnect_XXX.zip (XXX choose latest version)

5.3 First start / start recording

Press button for 2 seconds, beeper sounds for
1 second, the actual date and time will be
displayed for 2 further seconds.
LED lights green for 2 sconds - logging has started!
LED blinks green every 30 sec.
22
Display in Auto-Mode (Display shows all measurement channel in a 3 seconds
sequence)
LOG 200
LOG 220
By using the Software LogConnect, the presets can easily be changed.
* Download free LogConnect software:
www.dostmann-electronic.de/home.html ->Downloads ->Software/<your logger>/
Software/LogConnect_XXX.zip (XXX choose latest version)

5.3.1 Restart recording

See 5.3. First start / start recording. The logger is started by default by button and
stopped by USB port plug-in. The measured values are plotted automatically to the
PDF file.
NOTE: When you restart the existing PDF file is overwritten.
Important! Always save the generated PDF files to your PC. If LogConnect is
open when connecting the loggers and AutoSave is selected in Settings (Default),
the log results are copied to a backup location immediately by default.
LOG 210
Loggers with external inputs
only record the sensors that
are already attached at start
of logging.
23