Introduction; Kindly Note / Safety Instructions; Delivery Contents; Equipment And Usage - Dostmann Electronic LOG200 Série Mode D'emploi

Index
1. Introduction
2. Kindly note / Safety Instructions
3. Delivery contents
4. Equipment and usage
5. How to use device
5.1 Device description
5.2 Device start-up
5.2.1 Factory settings
5.2.1.1 Power-Save Mode for Display
5.2.2 Windows Software for LOG200-Serie
5.2.2.1 Configuration Software Log Connect
5.3 First start / start recording
5.3.1 Restart recording
5.3.2 Display used memory (%), date and time
5.4 Stop recording / create PDF
5.4.1 Stop recording by button
5.5 Description of PDF result file (Fig. C)
5.6 USB-Connection
5.7 Display Modes and Mode - Button: EXT , AVG, MIN, MAX 26
5.7.1 Special function of Mode-Button
5.7.1.1. Set marker
5.7.1.2 Reset Max-Min buffer
5.8 Battery replacement / Battery status indication
5.8.1 Set Date and Time after battery replacement via button 28
5.9 Alerts
6. Technical data 6.1 Risk of injury
7. Explanation of symbol
8. Waste disposal
9 Marking
10. Storage and cleaning
18

1. Introduction

Dear Sir or Madam,
19
Thank you very much for purchasing one of our products. Before operating the
19
data logger please read this manual carefully. You will get useful information for
19
understanding all functions.
19

2. Kindly note / Safety Instructions

• Check if the contents of the package are undamaged and complete.
20
• Remove the protection foil above the display.
21
• For cleaning the instrument please do not use an abrasive cleaner only a dry or
21
moist piece of soft cloth. Do not allow any liquid into the interior of the device.
22
• Please store the measuring instrument in a dry and clean place.
22 • Avoid any force like shocks or pressure to the instrument.
• No responsibility is taken for irregular or incomplete measuring values and their
22
results, the liability for subsequent damages is excluded!
22
• Do not use the device in explosive areas. Danger of death!
23
• Do not use the device in an environment hotter than 85°C!
24
The lithium battery may explode!
24
• Do not expose the unsit to microwave radiantion. The lithium battery may explode!
24

3. Delivery contents

25
• Data logger
25
• Wall holder
27

4. Equipment and usage

27
LOG200/LOG210/LOG220 series logger are suitable for recording, alarm
27
tracking and displaying of temperature, humidity*, dew point temperature*,
27
barometric** and CO
measurements. LOG200 TC and LOG210 TC feature 2 external inputs for thermocouples.
28
LOG200 E and LOG220 E feature one external input for temperature or
29
CO +Humidity probes (LOG220 E only). Areas of application include the monitoring
2
of storage and transport conditions or other temperature, moisture and / or
30
pressure-sensitive processes. LOG210 TC additionally supports wall mould
30
detection. The logger has a built-in USB port and can be connected without cables
30
to all Windows PCs, Apple computers or tablets (USB adapter might be required).
30
The USB port is protected by a plastic cap. Beside the actual measurement result,
the display shows MIN- MAX- and AVG-measurements of each measurement
• Battery 3,6 Volt (already inserted)
• USB protective cap, 2 x thermocouple type K (only TC)
• 2x screws and dowels
*** (*only LOG210/220,** only LOG220, *** only LOG220 E)
2
19