Cleaning And Maintenance - Velleman VTPY01 Mode D'emploi

 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Nor Velleman nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial,
physical...) arising from the possession, use or failure of this product.
4. How to Solder
 File off any dirt, rust or paint on the parts you wish to solder.
 Heat the parts with the soldering iron.
 Apply resin-based solder to the part and melt it with the soldering iron.
NOTE: Be sure to apply a solder paste to the part before applying non
resin-based solder.
 Wait for the solder to cool and harden before moving the soldered part.
CAUTION: Handle a heated soldering iron with extreme care as the high
temperatures may cause burns.
 The soldering iron may produce smoke at first use due to a dried out
heating element. This is normal and should only last for approx. 10
minutes.
 Never file the soldering tip.
 Use a soldering iron stand in order to avoid burns.
 The temperature of the soldering iron will drop if it is used without the
tip.
 Let the soldering iron cool after use.
 The mains cable of this device should not be replaced. Discard the
device if the power cable has been damaged.
 This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
 Children should be supervised to ensure that they do not play with the
appliance.
 Cleaning and user maintenance shall not be made by children without
supervision.

5. Cleaning and Maintenance

The soldering iron uses extremely high temperatures. Make sure that the
unit is switched off for maintenance purposes.
V. 03 – 04/05/2017
VTPY01
4 ©Velleman nv