Operating The Washer - Kenmore 796.4002 Série Guide D'utilisation Et D'entretien

OPERATING THE WASHER

MAX
SOFTENER
HOW TO USE
1
SORT LAUNDRY AND LOAD WASHER
Refer to page 15.
2
ADD DETERGENT AND OTHER PRODUCTS
Open the dispenser drawer and add
compartment in the dispenser drawer. Add bleach and fabric softener as
desired. See pages 16 and 17 for important information on detergents and
dispenser use.
3
TURN ON THE WASHER
Press the POWER button to turn ON the washer. The lights around the Cycle
Selector Knob will illuminate and a chime will sound. Refer to page 12.
4
SELECT A CYCLE
Turn the Cycle Selector Knob either direction to select the desired cycle. The
preset Wash/Rinse Temperature, Spin Speed, Soil Level, and Option settings
for that cycle will be shown. Refer to page 12.
5
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed if desired. This
can be done using the cycle modifier buttons as shown on page 19
(Wash/Rinse, Spin Speed, Soil Level, and Chime).
NOTE: To protect your fabrics, not all modifiers are available on all cycles.
6
SELECT CYCLE OPTIONS
Cycle options can also be added using the option buttons as shown on page
20 (Stain Treat, 2 nd Rinse, Control Lock, Auto Soak, Clean Washer and
Delay Start).
NOTE: Not all options are available on all cycles.
7
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. Once the cycle has been
started, pressing the START/PAUSE again will pause the washer and retain
the existing settings for up to 4 minutes.
13
detergent to the main wash