Remote Control (Optional) - Cameo CLPFLAT1TW Manuel D'utilisation

REMOTE CONTROL (OPTIONAL)

Aim the infrared remote control directly at the infrared sensor on the front of the lamp. The maximum range is approximately 8 metres. In
DMX and slave modes, the spotlight's IR sensor is deactivated.
ON/OFF – BL (Blackout)
The blackout button is used to switch off all LEDs, regardless of operating mode enabled via the remote control. Press the blackout button
again to reactivate the previously selected mode.
(Brightness)
4-level brightness setting. The different brightness levels can be accessed by repeatedly pressing this key.
FL (Flash/Stroboscope)
4-level speed setting for the stroboscope effect (repeated pressing). Level 1 deactivates the stroboscope effect, Level 2 produces a slow
flash frequency, Level 3 a medium frequency and Level 4 the fastest frequency.
CW/WW
Use these two keys to mix an individual colour temperature (cold white/warm white). 10 brightness levels can be accessed by repeatedly
pressing the respective key, whereby the LEDs are switched off at Level 1.
Pr+/Pr-
15 different colour temperature presets can be accessed by repeatedly pressing the Pr+ and Pr- keys (cold white –> warm white).
8