InnoCigs SC Basa Manuel D'utilisateur page 62

SC GS BASAL CLEAROMIZER – USING THE DEVICE
Changing the Atomizer Head
1� Remove the clearomizer from the battery / box mod of your e-cigarette�
2� Hold down the head base and unscrew it by turning it counterclockwise from the tank, while
the mouthpiece points to the ground�
3� Unscrew the old atomizer head from the base and insert a new one� Please first drip a few drops
of e-liquid directly into the wick of the coil to make it fully saturated before first use�
4� Connect all parts again and make sure that no e-liquid can leak�
5� Screw the clearomizer back to the battery / box mod�
Please note: Before first use, drip a few drops of your e-liquid onto the absorbent cotton of the evaporator head and leave
it in the liquid-filled tank for about 15 minutes after installation before you vape� Do not clean the head with water�
If necessary, simply wipe with a dry cloth� Because atomizer heads are wearing parts, they must be changed regularly�
60