Product Description; Cleaning And Maintenance - Ayce NT9005B-05 Mode D'emploi

PRODUCT DESCRIPTION

1 Temperature control knob
2 Air outlet grille
3 USB interface
4 Tip over switch
OPERATION
Note!
Since the appliance and its heating coils are slightly greased when delivered, there
might be a slight development of smoke and odour the first time it is used. This is harmless
and stops after a short a while. Be sure to provide for su cient ventilation during such time.
Warning!
Ensure that there is su cient distance from the wall, fixtures or other appliances.
The distance must be at least 1 m to exclude the risk of fire.
1. Take the appliance and all the accessory parts out of the packaging.
2. Check that the appliance shows no signs of damage.
3. Select a location that is firm, level and incombustible.
4. Insert the mains plug into a suitable wall socket with 220 – 240 V~ 50/60 Hz and a current
carrying capacity of at least 5A.
5.
Please be sure power switch is on " OFF" position.
The HEATER is operated by the manual controls located on the Control panel (as shown in
FIGURE 1) under below conditions:
6. Ambient temperature: -20℃～45℃
Relative humidity: ≤85%;
(FIGURE 1)
7. Power: The power switch is rotatable. Clockwise turn the temperature control knob,
machine is in using.
a) "OFF" position is o
b) "Max" position is the power state of heating element.
8. Turn the switch to "OFF" position and unplug the power cord plug when not use the heater.
9. USB port for charging(DC5V 2100mA)
Warning: Do not put the USB cable, mobile phone etc. in front of the heater.

CLEANING AND MAINTENANCE

1. Make sure the heater has unplugged from the power and completely cooled down before
cleaning.
2. Do not use gasoline, Banana Oil, diluents and other liquid which will damage the heater
surface.
3. Wipe with a dry cloth to remove dust and a damp cloth (not wet) to clean o stains, Be careful
not to allow moisture into the heater.
4. Make sure the heater has cooled down completely and dry before storage, store it in a dry and
ventilated place.
STORING
1. Always disconnect the appliance, let it completely cool and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction manual to
the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may damage the
appliance.
42 | 43 GB