Technical Specifications - Ayce NT9005B-05 Mode D'emploi

Mini radiateur en céramique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

plate of the appliance.
11.
Do not operate this appliance if the cable or plug becomes dam-
aged.
12.
Keep the appliance and cable away from sources of heat, sharp
objects or anything that may cause damage.
13.
Ensure the appliance is switched o before connecting to the
mains power supply.
14.
Switch o the power supply and disconnect from mains supply
when not in use, before cleaning or other maintenance.
15.
To disconnect the appliance, switch it "OFF", and then remove the
plug from outlet. Do not pull the cord to disconnect the plug.
16.
Do not operate in areas where gasoline, paint or other flam-
mable liquids are used or stored.
17.
Indoor use only.
18.
To prevent a possible fire, do not block air intakes or exhaust in
any manner.
19.
Don't touch the hot surfaces.
20.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening, as this may cause an electric shock, fire or
damage to the appliance.
21.
Always ensure that hands are dry before operating or adjusting
any switch on the product or touching the plug and socket-outlet.
22.
Do not leave this appliance unattended when it's in use.
23.
The most common cause of overheating is deposits of dust or
flu in the appliance. Ensure these deposits are removed regu-
larly by disconnect the appliance and vacuum cleaning air vents
and grilles.
24.
Do not place the heater on carpet, don't place the cable under
carpets. Arrange cord away from tra c areas so that it will not
be tripped over.
25.
Do not store away until the heater cools down, store the heater
in cool dry location when not in use.

TECHNICAL SPECIFICATIONS

Model
NT9005B-05
Rated Voltage
220-240 V~
Rated Frequency
50/60 Hz
Rated Power
500 W
Protective Class
II
Heating element
PTC
USB (OUTPUT)
DC5V 2100mA
40 | 41
GB

Publicité

Table des Matières
loading

Table des Matières