Jump Starting - Honda HSM1590i Manuel De L'utilisateur

Jump starting

Start the engine using the two 12V booster batteries, which are
connected in series.
1. Connect jumper cable A to the positive ( ) terminal
battery A. Connect the other end to the negative ( ) terminal
booster battery B.
2. Connect jumper cable B to the positive ( ) terminal
snowblower. Connect the other end to the positive ( ) terminal
on booster battery B.
3. Connect jumper cable C to the negative ( ) terminal
battery A. Connect the other end to the ground bolt
snowblower.
4. Start the engine (see page
5. Remove the jumper cables in the reverse order.
GROUND BOLT
JUMPER CABLE C
JUMPER CABLE A
38 ).
POSITIVE ( ) TERMINAL ＋
NEGATIVE ( ) TERMINAL
＋
＋
−
POSITIVE ( ) TERMINAL
JUMPER CABLE B
BOOSTER BATTERY B
BOOSTER BATTERY A
−
(Two 12 V batteries are connected in series)
on booster
−
on the
＋
on booster
on the
＋
NEGATIVE ( ) −
TERMINAL
POSITIVE ( )
TERMINAL
103
on
＋