Abus eytron TVVR50011 Manuel Utilisateur page 86

Setup wizard
Camera Management
1. Click on Enter.
2. Click on Status. The camera overview opens.
3. Deactivate the analogue camera inputs by uncheck-
ing the boxes.
Confirm with OK.
4.
Note
After making changes, a message appears indi-
cating that the system will be rebooted to activate
the settings.
Confirm with Yes.
The reboot process is then made.
5. Open the Camera Management screen. You can add
IP cameras by clicking on Add.
6. Exit data entry by pressing OK.
7. Click on Done to exit the wizard.
20
Note
You can edit all of the settings after exiting the
wizard.
To do this, open the menu (see page 32).