System Settings: Camera - Abus eytron TVVR50011 Manuel Utilisateur

Device menu
"DST Settings" Setting
tab
DST Activated when box is checked
From / To Date of DST start / end
DST Bias Daylight Saving Time Bias: Correc-
tion of the DST to the reference time
"More Set-
Setting
tings" tab
Device Name Unique specification of the device
Device Number Used for unique identification when
using remote control
Monitor Bright- Scroll bar (left = darker;
ness right = brighter)
Transparent 1:1, 3:1, 1:3 or Non-transparent –
used for managing the display of the
OSD in front of the background im-
age
Menu Dwell 1 to 30 minutes – regulates how long
Time the menu is shown
Activate Event Displays a symbol at the bottom-left
Note of the live image when an event oc-
curs
Activate Moni- Shows the monitor ID at the bottom-
tor Note left
(M = main monitor, A = auxiliary
monitor)
Main/AUX Video signal scaling on the AUX
CVBS Scaling monitor
Box checked / not checked
40

System Settings: Camera

All cameras or signal inputs (see page 3) are displayed in
the "Camera Management" overview.
Name Meaning
Camera No. Signal input
Camera Name Specified camera name
IP Camera Ad- Local (connected to the device) or IP
dress address on network cameras
Port N/A (connected to the device) or port
number on network cameras
Status Enable / Disable
1. Click on Status and activate or deactivate the con-
nected cameras.
2. Confirm with OK.
Note
The device must be rebooted in order to activate
the camera.
Pay attention to the network settings (see page
49).
3. Select the camera by clicking the corresponding line.
4. Select Set to define a new camera connection.