dirna Bergstrom Bycool Green Série Instructions De Montage page 20

COMPACT 1.4
ES
EN
Air conditioning for vehicles
11 Once these operations are complete, dismount
11
the console, turning the nuts (A) until the EPDM
seal is compressed between 3 and 5 mm
approximately, then turn the nuts at the base of
the Compact (B) and the upper nuts of support
C. Diagram A.
A
Important: In order to prevent possible filtrations
!
of water, ensure the seal is tight with the base of
the Compact - Torque 1.3 a 1.8 kg. As indicated
in Diagram A.
Turn nuts "A" to tighten the seal between 3 and 5
mm and then tighten nuts "B" and "C".
12 Mount the console again using the original
12
screws.
12
20