Lubrication; Accessories - Facom E.2015 Notice Originale

Décapeur thermique digital
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
MAINTENANCE
Your power tool has been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.

. Lubrication

Your power tool requires no additional lubrication.
. Cleaning
Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the
air vents.
WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. Use
a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.

Accessories

.
E.2002B1
E.2002B3
. Optional Accessories
E.2002B2
E.2002B4
Only FACOM, recommended accessories should be used with this product.
Consult your dealer for further information on the appropriate accessories.
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw
materials.
DISPOSAL OF THIS ARTICLE
Dear Customer, If you at some point intend to dispose of this article, then please keep in mind that many
of its components consist of valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with your local council for recycling facilities in
your area.
NU-E.2015_0216.indd 9
Distribution nozzle
Reflector nozzle
Cross-flow nozzle
Concentrator nozzle
2/19/2016 3:07:36 PM

Publicité

Table des Matières
loading

Table des Matières