Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Phillips screwdriver
¼" (6 mm) nut driver
Measuring tape
Parts Needed
(2) Spacer bars - included with built-in microwave oven
(4) Hex-head washer screws - included with built-in
microwave oven
(4) Pan-head screws - included with built-in microwave oven
Parts Supplied
Bottom vent
2
BUILT-IN MICROWAVE OVEN SAFETY
Your safety and the safety of others are very important.
INSTALLATION REQUIREMENTS
Level
Drill
¹⁄₈" (3 mm) drill bit
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum clearance with
microwave oven.
Recessed installation area must provide complete enclosure
around the recessed portion of the microwave oven.
Microwave oven support surface must be solid, level and
flush with bottom of cabinet cutout. Floor must be able to
support a weight of 90 lbs (41.0 kg).
IMPORTANT: To avoid damage to your cabinets, check with your
builder or cabinet supplier to make sure that the materials used
will not discolor, delaminate or sustain other damage. This oven
has been designed in accordance with the requirements of UL
and CSA International and complies with the maximum allowable
wood cabinet temperatures of 194F° (90°C).
Bottom Vent Dimensions
27" (68.6 cm) Models
³⁄₄
A. 26
" (67.9 cm) overall width
A
30" (76.2 cm) Models
³⁄₄
A. 29
" (75.6 cm) overall width
Publicité
Table des Matières
