Table des Matières
Publicité
light (2a) on.
RED indicator light (2b) on.
(2a) on and RED indicator light (2b) on.
ing.
• Wh
(3).
NOTE Both switches must be enabled in order to
switch the motor on and keep it running.
The motor will stop if either switch is released.
WARNING!
For your safety and that of
others:
1) Do not use the machine without having
read the instructions carefully. Become
-
ac quainted with the controls and the pro-
per use of the machine. Learn how to stop
obeyed, there still can be a certain residu-
able potential endangerments can be:
– Contact with the unprotected cutting teeth.
– Involve fingers or hands into the moving
-
cutting blade.
ting blade.
– Thrown away of chips, it may damage your
-
eyes.
– Damage of the hearing, if no protection of
the ears is carried.
is re sponsible for accidents or hazards oc-
curring to other people or their property.
4) Always wear suitable clothing when us-
ing the machine. Your dealer can provide
you with all the information on the most suit-
able accident-prevention devices to guaran-
tee your safety.
5) Mow only in daylight or good artificial
light.
and remove anything that could be thrown up
by the machine or damage the cutting de vice
(branches, iron wire, hidden wiring, etc.).
7) Be careful of flying debris coming from
the cutting device.
8) Stop the motor and remove the accumula-
tor from its compartment.
– whenever you leave the machine unat-
tended;
the machine;
before restarting it again;
– if the machine starts to vibrate abnormal-
ly: find the cause of the vibration imme dia-
tely and have it inspected at a Spe cia li sed
Centre;
– when the machine is not in use.
the cutting device, especially when starting
the motor.
IMPORTANT Remember that an electric hedge
others. To respect people and the environment:
– Avoid using the machine in environments or
provisions for the disposal of waste materials
after cutting.
11
-
-
Publicité
Table des Matières
