Operating Panel - Vetus BW312A Manuel D'utilisation Et Instructions D'installation

Operating panel

Using the template provided, cut out an opening in the instrument panel or bulkhead.
Attach the operating panel using the 4 screws provided.
Connect the operating panel to the battery watch by means of the multi core cable with the
8 way RJ connector.
Application of the battery watch with 2 batteries
Inside the operating panel 4 way DIP switch is provided to prevent a continuous detection
of an under voltage at the not used terminal.
START START START
THRUSTER THRUSTER THRUSTER
LIGHT LIGHT LIGHT
15
090303.03
Battery watch BW312A / BW324A