Used Symbols; Safety-Related Information; Normative Directives; Correct Use - oventrop Unibox TQ RTL vario Notice D'utilisation

Safety-related information

1.6 Used symbols

Highlights important information
and further explanations.
Action required
f
• Enumeration
1. Fixed order. Steps 1 to X.
2.
Z Result of action
2. Safety-related information

2.1 Normative directives

Observe the legal requirements applicable at
the installation location.
The current standards, regulations and guide-
lines apply.
• DIN EN 1264
• DIN 18380
• VDI 2035
• DIN EN 16313

2.2 Correct use

Operating safety is only guaranteed if the prod-
uct is used correctly.
The "Unibox TQ RTL vario" limits the fluid
temperature of a radiator heating circuit and
uses it to regulate the temperature balance
of floor and wall surfaces in individual rooms.
The "Unibox TQ RTL vario" is also used for
individual room temperature control through
the use of a thermostat with remote control or a
room thermostat with actuator. The flow rate is
automatically controlled by the integrated "QA"
valve insert.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer
and/or its authorised representatives due to
damage caused by incorrect use will not be
accepted.
Observance of the operating instructions is part
of compliance with correct use.
28
Unibox TQ RTL vario

2.3 Modifications to the product

Modifications to the product are not permitted.
In the case of modifications to the product, the
warranty will become void. The manufacturer
will not accept liability for damage and break-
downs caused by modifications to the product.

2.4 Warnings

Each warning contains the following elements:
Warning symbol SIGNAL WORD
Type and source of danger!
Possible consequences if the danger oc-
curs or the warning is ignored.
f Ways to avoid the danger.
Signal words identify the severity of the danger
arising from a situation.
NOTICE
Indicates a situation that may lead to
damage to property if not avoided.

2.5 Safety notes

We have developed this product in accordance
with current safety requirements.
Please note the following information concern-
ing safe use.
2.5.1 Danger caused by inadequately
qualified personnel
Work on this product may only be carried out
by qualified tradespeople.
Electrician
Qualified electricians are able to carry out any
work on electrical installations and connections
as a result of their professional training, exper-
tise and experience, as well as their knowledge
of the relevant standards and regulations. They
must be able to independently identify possible
dangers.
102273680-V01.07.2019