Annexe B. Portable And Mobile Computer Activation - IBM iLV200 Guide De L'utilisateur

Annexe B. Portable and mobile computer activation

Many mobile computers do not automatically turn on their external video port
when a projector is connected. Activation commands for some mobile
computers are listed in the following table. (If your computer is not listed or
the given command does not work, refer to the computer documentation for
the appropriate command.) On many mobile computers, the activation function
key is labeled with an icon such as that in the following illustration.
Remarque : Visit http://www.infocus.com/ for the most current activation
chart. It is located in the Service and Support link.
Remarque : Usually, pressing the key commands once activates the external
video port, pressing it again activates both external and internal
ports, and pressing it a third time activates the internal port. Refer
to your computer's documentation for details on your specific
model.
Computer
Acer
AST* **
AMS
AMT
AT&T
Advanced Logic Research
Altima
Ambra**
Amrel* **
© Copyright IBM Corp. 2002
Key command to
activate port
Ctrl+Alt+Esc (for setup)
FN+D or Ctrl+D
Ctrl+FN+D
FN+F5
type from A:\IVGA\CRT
FN+F12
FN+F2
setup screen
FN+F3 FN+F6
Ctrl+Alt+V
Shift-Ctrl-Alt-C
setup VGA/Conf.Simulscan
FN-F12
FN-F5
F2/Choose Option/F5
setup menu
Shift-Ctrl-D
Key command to
deactivate port
Ctrl+Alt+Esc (for setup)
FN+D or Ctrl+D
Ctrl+FN+D
FN+F5
type from A:\IVGACRT
FN+F12
FN+F2
setup screen
FN+F3 F+-F6
Ctrl+Alt+V
Shift-Ctrl-Alt-L
setup VGA/Conf.Simulscan
FN-F12
FN-F5
F2/Choose Option/F5
setup menu
Shift-Ctrl-D
B-1