Using The Glasstron - Sony Glasstron Lite PLM-A35E Mode D'emploi

Using the Glasstron

If you set the user lock, unlock it (page 19).
Before you start...
Be sure to follow the procedures in "Connecting the Glasstron" (pages 8 - 11) and "Wearing the
Glasstron" (pages 12 - 14).
WARNING
Each time you use this product, adjustment screens will appear, requiring the viewer to
properly fit the product. To prevent eye damage, do not use this product if the vertical lines
do not cross the horizontal line on the next screen.
The Glasstron includes two small (left and right) LCDs. You are watching a combined picture
created from these two screens. Although the screen position is properly aligned at the factory, it
may become misaligned if the Glasstron is deformed or damaged. Check the screen position
alignment every time you turn on the Glasstron. If you cannot have correct screen alignment,
stop using the Glasstron immediately.
1
Turn on the Glasstron using the POWER ON/OFF switch.
The POWER lamp lights up.
POWER ON/OFF
Screen
continued
15
-GB