Sony Glasstron PLM-A35 Mode D'emploi page 23

3
Start playback on the video equipment connected to the
Glasstron.
4
Adjust the volume by turning the VOL control.
When you set the AVLS ON/OFF switch to ON, you cannot turn up the volume beyond
the defined limit (see page 24).
5
Check that the four corners of the screen are clear.
If the four corners of the screen are not clear, do the step 2 (page 22) to check the screen
position alignment again.
6
Adjust the brightness by turning the BRIGHT control.
VOL
lower louder
BRIGHT
− ＋
less bright brighter
continued
23
-US