Haier HRB15N3 Instructions D'installation Et Guide De L'utilisateur page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8. Move the door closure to the opposite side. Flip over the door
closure so that the curved edge of the closure is toward the
center of the door.
9. Remove innermost screw. Fit the door closure on top of the
door stop screw, and fasten with the innermost screw.
a
Door Closure
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
10. Using two or more people lay the refrigerator on the floor.
11. Remove the three screws attaching the bottom hinge to the
cabinet. Remove the bottom hinge and save for possible future
use.
a
Bottom Hinge
b
Screws
8
12. Remove a new bottom hinge from the accessory bag. Using the
three screws removed earlier, fasten the bottom hinge to the
opposite side of the cabinet.
a
b
a
REINSTALL DOORS
1. Align the hole in the bottom of the freezer compartment door
with the hinge pin and gently lower the door onto the bottom
hinge.
2. Align the edge of the freezer door with the side of the cabinet
before installing the center hinge.
3. Remove the new center hinge from the accessory bag, insert
the hinge pin into the top of the freezer compartment door,
and then fasten the hinge to the bottom of the refrigerator
compartment opening.
4. Remove the new top hinge from the accessory bag. Insert the
hinge pin into the hinge hole in the top of the refrigerator door,
and then gently lower the door onto the center hinge.
5. Align the edge of the refrigerator door with the side of the
cabinet before fastening the top hinge.
6. Using the top hinge screws, removed earlier, fasten the top
hinge to the refrigerator cabinet.
a
b
a
Bottom Hinge
b
Screws

Publicité

Table des Matières

Dépannage

loading

Table des Matières