Symbols Used On The Appliance; Getting To Know The Appliance; Handling The Packed Appliance; How To Move The Machine - Fimap FM 1500 S-V Manuel D'utilisation Et D'entretien

Appliance's earth symbol:
Indicates the earth connection point of the appliance's electric system.
Maximum gradient symbol:
X%
Indicates the maximum gradient.
Since the packaging elements (plastic bags, staples, etc.) are
a potential source of danger, they should not be left within the
reach of children, disabled persons, etc.
The overall weight of the appliance with packaging is 45Kg
(weight of empty machine plus packaging).
The dimensions of the package are as follows:
U/M
A mm
B mm
C
mm
HOW TO UNPACK THE MACHINE
1.The machine is fixed inside the box by means of reinforcements; remove them and set them
aside for future transport.
2.Remove the outer packaging.
3.Use a chute to get the machine down from the pallet, pulling it backwards.
4.Keep the pallet for any future transport needs.
WARNING: if the product is delivered in cardboard
containers, handle the packed product with suitable
lifting means that comply with the legal requirements.
.

HOW TO MOVE THE MACHINE

1. Remove the pad holder from the base (see corresponding chapter
"DISASSEMBLING THE BRUSH")
2. Position the single brush on the pallet by means of a chute
3. Insert the cardboard box and the previously kept supports
HANDLING AND TRANSPORTATION OF THE MACHINE
To handle the machine safely, proceed as follows:
1. Rotate the handlebars to the rest position (see chapter HANDLEBAR ADJUSTMENT)
and fix them in this position
2. Tilt the machine, by putting a foot into the rear of the base body, so only the rear
wheels touch the ground and the machine can move freely.

HANDLEBAR COMPONENTS

The handlebar components are identified as follows:
1.Main switch control lever
2.Handlebar tilt adjustment lever
3.Man present push-button

SYMBOLS USED ON THE APPLIANCE

GETTING TO KNOW THE APPLIANCE

HANDLING THE PACKED APPLIANCE

S-V
1500
691
580
1230
24