Watching Tv; Turning On/Off The Power; Initial Installation - Sharp LC-55LE643U Mode D'emploi

Watching TV

Turning On/Off the Power

Press POWER on the TV, or POWER on the remote control unit to turn the power on.
POWER button
POWER
INPUT
1 2 3
4 5 6
7 8 9
0
ENT
INFO F RE E Z E AUDIO FLASHBACK
NOTE
• The Initial Installation starts when the TV powers on for the first time. If the TV has been turned on before, the Initial
Installation will not be invoked. For changing the settings of the Initial Installation, perform "Easy setup" on the Initial
Setup menu on page 23.
Press POWER on the TV, or POWER on the remote control unit again to turn the power off.
• The TV enters standby and the image on the screen disappears.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.

Initial Installation

When you turn on the TV for the first time, the Easy Setup will guide you through the setup process. Perform
the following steps before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 6.)
2. Connect the antenna cable to the TV. (See page 6.)
3. Plug in the AC cord to the AC outlet. (See page 5.)
POWER
button
Language Setting
Select from among 3 languages: English, French and Spanish.
1
Press t/u to select the desired language listed on the screen, and then press ENTER to continue to the
next step.
Menu Language
Language selection
Change
ENTER Select
TV Location Setting
Select "Home Mode" or "Store Mode" for the location where you plan to install the TV. This product qualifes
for ENERGY STAR in Home mode default setting.
2
Press c/d to select "Home Mode" or "Store Mode".
Press ENTER to continue to the next step.
TV Mode
Mode selection
Change
ENTER Select
Time Zone and Daylight Saving Time Settings
Make settings for the time zone and daylight saving time where you use the TV.
3
Press c/d to select the time zone where you are using the TV, and then press ENTER to continue to
the next step.
Time Zone
Set your time zone
Change
ENTER Select
• The time zone differs depending on the selected country.
• The factory preset value is the time zone for the capital of the selected country.
Language: English
EXIT Exit
Mode: Home Mode
RETURN Previous Step EXIT Exit
Time Zone: Alaska
RETURN Previous Step EXIT Exit
13