Avintage DVP180G Notice D'utilisation page 97

THERE IS AN ERROR CODE ON THE DISPLAY OF MY WINE
CELLAR
The electronic system can detect a default and indicate an error code on the
display, as A1, A2...
In case you see this code, please note it and give it to the technician who
will find on our technical documentation the meaning of this code. In that
case it is recommended to unplug your product.
It will help him to solve easier and faster the possible problem.
When the alarm is on, you can deactivate temporally the sound by pressing
the UP key « « during 5 seconds. A message will be display to indicate
that the alarm is deactivated.
If after one hour, the parameters are not back to normal, the sound alarm
will be on again. We recommend you to disconnect your appliance and call
the service centre.
But, whatever happens, do not panic if you observe an abnormal temperature
or relative humidity value inside your wine cabinet!
Only an extended and persistent exposure of your wines to these abnormal
conditions might prove detrimental to them.
97