Key Pannel; Weighing Operation - WUNDER RS Guide Rapide

ENGLISH
Tasti funzione
On/Off/Zero/Tare
Hold (weight lock)
1. ON/OFF/ZERO/TARE：
1. Switch on/off the scale
2. Press this key to zero the scale. The zero range is +/- 2% of full capacity.
3. Press this key to tare when loads over zero range.
4. In tare mode, press this key again to clear the tarred value when there is no load on the platform.
5. Press this key without release 3 seconds to power off the scale.
2. HOLD: Press this key to lock weight value while weighing. Disable the hold function, press Hold key again.
3. NET: "Net" function indicator
4. HOLD: "Hold" function indicator
Before reading detailed instructions on how to use all the weighing functions, please read the following guidelines:
- Always be sure that the display shows `Zero` before use, if it doesn't then press the ZERO key.
- The Professional Medical Hoist scale is designed to detect when a stable weight is achieved, your reading should be
taken at this point.
- An inclination of more than 3° will result in inaccurate readings.
- For a correct weight measurement, during the weighing phase, the operator, before leaving the
patient free, must ensure that the patient remains stationary to prevent twisting and oscillation of the
instrumentation and carry out an incorrect weighing.
-We recommend not to apply the dynamometer to lifters with a fixed suspension arm without the
possibility of rotating at 360°.
-Do not tilt or rotate the dynamometer horizontally.
RS RÈV.07 12/02/2019
FUNZIONI RS300:
HOLD = Weight lock indicator
NET = net weight
GROSS = gross weight
kg = weight unit

5. WEIGHING OPERATION

ATTENTION! Tilt angle over 3° will cause false reading.

4. KEY PANNEL

3. HOLD 4. NET 5. GROSS
26