Safety; Important Directions - WUNDER RS Guide Rapide

ENGLISH
Operators must read this manual carefully, follow the instructions contained therein and become familiar with the correct
use and maintenance procedures of the instrument.
This manual contains important information for the installation, use and maintenance of the dynamometer.
The manufacturer assumes no responsibility for direct or indirect damage, including loss of profits, or for any other
commercial damage that may result from the use of the product that does not comply with the instructions in this
manual. Keep this manual and the declaration of conformity for consultation and support of personnel training:
• Do not overload the instrument beyond the maximum flow value.
• Do not apply loads abruptly.
• Do not use sharp or pointed objects to press the keys.
• Do not attempt to open the instrument.
• Do not remove the seals on the instrument.
• Do not short-circuit the battery terminals.
• Use only the power supply provided by Wunder and before use check the compatibility between the local mains
voltage and the adapter's rated voltage (if equipped).
• Periodically check the integrity of the instrument power cable and do not come into contact with hot appliances.
• Make sure that the power cord does not create a risk of getting in the way or getting caught.
• Before cleaning the instrument, unplug the power cord.
• Do not immerse the instrument in water or other liquids.
• Have the maintenance operations and the subsequent metric checks done regularly (see paragraph).
• If on wheels, make sure that the instrumentation can not move accidentally. Use the parking brake while the
patient sits up and stands up and help people who do not stand up properly.
NOTE: The medical device requires special precautions regarding electromagnetic compatibility and must be installed and
used according to the information supplied with the accompanying documents.
The assembling of RS dynamometer must be done by skilled operators only and before the use be
sure that all hanging sick lift elements, dynamometer and sling are properly assembled, to weight
the patient on safety conditions. A faulty assembling of these elements could cause the risk of
falling with serious consequences for the patient.
AFTER THE ASSEMBLY PHASE AND BEFORE PILLING THE PATIENT, THE OPERATOR MUST MAKE
SURE THAT:
THE PATIENT IS PROTECTED WITH SOFT PARTS TO AVOID IMPACTS OR SERIOUS DAMAGES. IN
PARTICULAR, PLACE THE PATIENT MATTRESSES, PILLOWS, BED OR ANY SOFT ELEMENT TO
RS RÈV.07 12/02/2019

2. SAFETY

WARNING!

IMPORTANT DIRECTIONS

20