Intended Use - WUNDER RS Guide Rapide

ENGLISH
- When using electrical components under increased safety requirements, always comply with the appropriate
regulations.
- Improper installation will render the warranty null and void.
- Ensure the voltage marked on the power supply unit matches your mains power supply.
- This device is designed for use indoors.
- Observe the permissible ambient temperatures for use
- The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum values
specified in the applicable standards.
- Ensure that the patient does not lean against the device risk of falling! If you have any problem, contact
your local service partner.
- The maximum scale loading must not be exceded. The device beeps when loading exceeds its maximum capacity.

2.1 Intended use

This device is intended to be used for the suspension weighing of patients for general diagnostic purposes.
Environment of use: in hospitals and specialized medical clinics. The installation room must be equipped with an
electrical system that complies with the regulations in force. It is recommended to use the device in environments not
exposed to magnetic interference.
Personnel destined to use the product: specialized operators and doctors who are aware of all the safety procedures
for correct use.
Control and Responsibility: the medical device must be used under the supervision of a qualified doctor
or qualified maintenance personnel and periodic checks that are aware of all safety procedures.
Limitations of use: this medical device may only be used as described in this manual.
2.2 Manufacturer's guide and declaration – electromagnetic immunity
Guide and Statement of manufacturer – Electromagnetic emissions
The electronic scales RS model is scheduled for operation in the electromagnetic environment specified below. The
customer and the user should ensure that it is used in that environment
Emission test
RF Emission CISPR11
RS RÈV.07 12/02/2019
Conformity
Group 1 Class B
Guide to electromagnetic environment
The scales RS cable model uses RF energy only for its
internal function. The refore its RF emissions are very
low and probably not cause no interference in
electrical equipment.
22