dirna Bergstrom bycool green line COMPACT 3.0 RENAULT Instructions De Montage page 22

COMPACT 3.0
EN
Place the evaporator front on previous studs
13
with (1) M6 x25 spacer on each stud.
13
EPDM
Gasket
Stud M6
Cabin roof
Upholstey
hexagon M6x25
To present console and the equipment centred
14
on the best placement of the cabin roof .One
time centred to remove console.
Fasten supports tightening nuts until outside
15
EPDM joint (Point 3) of equipment is
compressed, between 3 and 6 mm.
Important: To avoid water from filtering inside
cabin, check EPDM joint tightening with
Compact base, as indicated on diagram.next
page
Unit base
14
Renault premium
Air ducts
A
22
Air conditioning for vehicles
Foam Gasket
front with louvers
Comprobar la
compresión de la
junta EPDM usando
un flexómetro en las
cuatro esquinas.
14
15