General Characteristics - Cembre SD-19BR Notice D'utilisation Et Entretien

Drilling Machine:
Rated drilling capacity
Drilling thickness
Rated no load speed n (spindle)
0
Brushless electric motor
Degree of protection (motor-battery)
Weight with battery
Dimensions
Operating temperature
Supplied TPM guard nozzle
(1)
Air Noise
(1)
Air Noise (RP... versions)
(2)
Vibrations
* Using Cembre PV... augers series with standard lenght of 325 mm. Depending on the PV... auger usage, higher drilling
thicknesses are possible (Ref. to § 10).
** TPM200-26: suitable for augers having ø max. 20 mm and centering for ø 26 mm plate hole.
TPM190-24: suitable for augers having ø max. 19 mm and centering for ø 24 mm plate hole.
(1) Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
(2) Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard, and
under operating conditions much more severe than those normally found.
Rechargeable battery:
Type
Voltage / Current / Energy
Weight
7

1. GENERAL CHARACTERISTICS

Ø mm
mm
RPM
V
kg
°C (°F)
type
dB
dB
m/s 2
V / Ah / Wh
kg
SD-19BR SD-19BR-RP
SD-19BRA SD-19BR-RPA
SD-19BRT SD-19BR-RPT
28
200 *
700
36
IP 20
(standard versions)
IP 44
(RP... versions)
16.8
(standard versions)
17.4
(RP... versions)
Ref. to page 91
-20 to +50 (- 4 to +122)
TPM200-26 **
L 80.4 (A) L
pA pCPeak
L 77.6 (A) L
pA pCPeak
a 1.36 max.
h
CB3662L (Li-Ion)
36 / 6,2 / 223,2
1,6
SD-19BR2E
SD-19BR2-RPE
TPM190-24 **
97.5 (C) L 88.4 (A)
WA
94.4 (C) L 88.5 (A)
WA