ARTHUR MARTIN AW6F3844BB Notice D'utilisation page 16

16
Programme
Default tem‐
perature
Temperature
range
Rinçage
Vidange/
Essorage
Anti-allergie
Vapeur
60 °C
Lavage tam‐
bour
60 °C
Soie
30 °C
Maximum Maxi‐
spin mum
speed load
Spin
speed
range
[rpm ]
1400 rpm 8 kg
(1400-
400)
1400 rpm 8 kg
(1400
-400)
1400 rpm 8 kg
(1400 -
400)
1200 rpm -
(1200 -
400)
800 rpm 3 kg
(800 -
400)
Programme description
(Type of load and soil level)
All fabrics, except woollens and very delicate
fabrics. Programme for rinsing and spinning the
laundry. The default spin speed is the one used
for cotton programmes. Reduce the spin speed
accordingly to the type of laundry. If necessary,
set the Rinçage Plus option to add rinses. With a
low spin speed, the appliance performs delicate
rinses and a short spin.
To spin the laundry and to drain the water in the
drum. All fabrics, except woollens and delicate
fabrics.
White cotton items. This programme removes
micro-organisms thanks to a washing phase with
the temperature maintained above 60°C for some
minutes. This helps in removing germs, bacteria,
micro-organism and particles. The addition of va‐
pour together with an additional rinsing phase en‐
sures a proper removal of detergent residues and
pollens/allergenic items, making it suitable for deli‐
cate and sensitive skins .
Maintenance cycle with hot water to clean and
freshen the drum and to remove residue that may
cause odour. For the best result use this cycle
once a month. Before running this cycle, remove
all items from the drum. In the washing phase
compartment of the detergent dispenser, put the
flap of the compartment in upward position. Pour a
cup of chlorine bleach or a washing machine
cleaner in the washing phase compartment. DO
NOT use both together.
After the drum cleaning, run a fur‐
ther rinse cycle with empty drum
and no detergent to remove any
residue of bleach.
Special programme for silk and mixed synthetic
items.