Venom Group International Medion Dual 10 amp Manuel D'utilisation page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

FEATURES
[Operating Software]
The microprocessor controlled CPU has software with multiple levels of battery monitoring for
maximum safety. Error warnings include: input voltage warning, reverse polarity protection and
Lithium cell count input error warning.
[High Power Charge Circuit]
Dual 200-watt charge circuits can charge up to 18 NiCD/NiMH or 6 Lithium cells with a maximum
current of 10A. A temperature controlled internal cooling system keeps the whole operating
system working at maximum efficiency in a wide variety of conditions.
[Dual Audio Speakers]
The Medion Dual 10 Amp Charger has two integrated speakers with a standard audio input
allowing the user to play music from their MP3 player, or smart phone right in their pit area or
workshop.
[USB Power Output]
5V 1A USB power outlets for charging smart phones, MP3 player, or included LED light.
[Cell Balancer for Lithium Batteries]
A built-in monitoring circuit can check and regulate the voltage of individual cells in a Lithium
battery pack. It can monitor and balance packs in charge, discharge, and storage modes.
[Supports Multiple Lithium Chemistries]
Accepts three types of Lithium battery chemistries, including LiPO, LiIo, and LiFe.
[Lithium Storage and Fast Charge Modes]
Storage mode conditions Lithium batteries for long-term storage. Fast charge mode safely charges
Lithium batteries at high rates without risk of damage to the pack.
[Temperature Limit]
Using the included external temperature probe, a thermal shut down temperature can be set. This
will stop the charge or discharge process should a battery exceed the temperature limit to prevent
overcharging, fire, or other damage.
[Safety Timer]
This will stop the charge or discharge process if the charger cannot detect a peak, or if the
capacity limit is not tripped.
[Input Power Monitor]
Charging or discharging processes will stop if the input voltage is too low. This is to protect the
input source, usually a 12V car battery.
[Data Store/Load]
For ease-of-charging or discharging on frequently used packs, 5 different programmable battery
profiles are available.
[ 3 ]
0668

Publicité

Table des Matières
loading

Table des Matières