Venom Group International Medion Dual 10 amp Manuel D'utilisation page 22

MISCELLANEOUS DISPLAY SCREENS
There are several alternate screens that can be viewed during the charge and
discharge process. Pressing the DEC button will show the user input settings.
Individual cell voltage can be viewed by pressing the INC button during LiPO
balancing operations.
0668
Final Voltage when charging is complete.
Capacity cut-off function is turned On and
capacity value displayed.
Safety timer function is turned On and time value
displayed.
Temperature cut-off function is turned Off and
the temperature value displayed.
Internal temperature of the charger, and external
temperature of the battery displayed. (External
temperature is only displayed when using the
external temp probe).
Present input voltage to charger. This is useful
when charger is attached to 12V battery to avoid
discharging it too far.
Using the cell balance block with Lithium
batteries, you can view the individual cell voltage
in the pack. To use this, you must have the cell
balance block attached to the battery pack.
[ 21 ]