Publicité
Les langues disponibles
Les langues disponibles
REPLACING FUEL CONTAINER
1. If the fuel container is empty (
), unscrew the cap with the pumping hose and remove the container from the
holder (
) (I).
2. Insert a full fuel container with a cap removed (
) (II).
3. Screw the cap with the pumping hose back on (III).
I
II
III
FLAME IGNITION
The green diode
indicates that the device is ready to ignite the flame.
Press and hold START for 3 seconds. Flame ignition will take 2-10 minutes (
). The smell of ethanol vapours can be
) indicates that
present during the ignition. The diode READY off (
the flame has been ignited and the device
reached the working temperature.
FLAME HEIGHT REGULATION
After 3 min, press ECO to lower the flame (two sound signals). Press ECO again to increase the flame height (one
sound signal).
ATTENTION!
In case the device temperature is too high, the flame will be automatically lowered (ECO) and the height
regulation blocked. If the temperature keeps increasing, the device will be turned off.
FLAME EXTINGUISHING
Press STOP to extinguish the flame (sound signal +
).
You can ignite the flame again when the device is cooled – the green diode READY (
).
FAST START
The FAST START offers faster flame ignition . The function is enabled by default.
To disable FAST START, press and hold ECO for 10 seconds (four sound signals). To enable the function, press
and hold ECO for 10 seconds (two sound signals).
14
Publicité
