Transport; Storage; Installation, Characteristics Of Machine Room - Arneg SR2 Manuel D'installation Et De Service

SR2-SR3
English

10. Transport

WARNING! Heavy object. Crushing
The handling area should be free of persons and objects.
The loading-unloading operations must be performed by qualified personnel that are
able to verify weights, the exact points for lifting (without piping, cables, electrical
panels, etc.) and the most suitable means, both in terms of safety and lifting capacity.
The refrigeration systems are equipped with a self-bearing frame for transport by means of
forklift trucks.
Features of the Use a forklift:
forklift
- with suitable specifications in compliance with applicable standards
- NOT worn/damaged
- bracket length: minimum 950 mm
- manual or electrical suitable for lifting the refrigeration system with rated
capacity equal or greater than 1000 kg
- with compliant and NON worn cables
Safe handling
(what to do)
if you handle the unit with a crane, use:
a harness that does not exert stress crosswise the refrigeration system and
i
DO NOT use transportation procedures other than those indicated

11. Storage

Remedy
What to avoid

12. Installation, characteristics of machine room.

WARNING!
Before proceeding with any operation adopt all the precautions possible to avoid
accidents. Wear the Personal protective equipment provided (cap.3.).
Installation must be performed exclusively by trained staff authorised by the body
specified in the contract (manufacturer/representative/dealer)
i
- It is the responsability of the customer to provide the installation area
- Changes to the setup described here must be authorized by ARNEG S.p.A.
32
make sure there are no foreign objects within the handling area
always place the lifting brackets in the indicated points (Fig. 4)
always introduce the brackets completely.
distribute the weight of the refrigeration system evenly to maintain the
centre of gravity of the load balanced (Fig. 3)
WARNING! Heavy object. Crushing
Observe the indications regarding safe handling
Dragging. seizure/deformations/tearing
- DO NOT drag/push the refrigeration system
- Observe the indications regarding safe handling
a bracket with suitable bearing capacity
does not damage its parts
Store the open refrigeration systems indoors at temperatures between -25°C and
+55°C and air humidity between 30% and 80%.
DO NOT store the refrigeration systems outdoors exposed to weather
and direct sunlight.
05060162 00 02/02/2016