Introduction; Product Overview; Technical Support; Supplies & Replacement Parts - Cavitron JET Plus Mode D'emploi

INTRODUCTION

Congratulations!
Your decision to add the Cavitron
Scaler and Air Polishing Prophylaxis Combination System
with Tap-On™ Technology to your practice represents a wise
investment in good dentistry.
For over four decades, dental professionals have preferred
the clinical benefits and labor-saving advantages inherent in
Cavitron ultrasonic scalers. Clinical studies and independent
research have confirmed the speed, efficiency and versatility
of ultrasonic scaling.*
With the addition of air polishing capabilities in the Cavitron
JET Plus Combination System, your Cavitron JET Plus system
becomes a compact prophylaxis center that optimizes the
time spent performing scaling and polishing procedures and
minimizes the need for strenuous calculus and stain removal
with hand instruments. Clinical studies have proven that air
polishing is far superior to traditional cup and pumice for
stain and plaque removal.* With proper technique and simple
daily maintenance, your Cavitron
System will immediately become an indispensable component
in your practice of modern preventive dentistry.
DENTSPLY Professional is an ISO 13485 registered
company. All DENTSPLY Professional medical devices sold
in Europe are CE marked in conformance with Council
Directive 93/42/EEC.
Website: www.professional.dentsply.com
CAUTION: United States Federal Law restricts this
device to sale by or on the order of, a licensed dental
professional.
For dental use only.

PRODUCT OVERVIEW

The Cavitron JET Plus Combination System is a precision
®
engineered and manufactured instrument. It contains
controls and components for ultrasonic scaling and air
polishing modes. In the scaling mode, the system produces
30,000 strokes per second at the ultrasonic insert's working
tip that when combined with the cavitational effect of the
coolant lavage creates a synergistic action that is designed
to "power away" even the heaviest calculus deposits while
maintaining operator and patient comfort. In the air polishing
mode, the system delivers a precise air/water/powder
mixture at the JET air polishing insert tip that polishes the
tooth enamel without contact so there is less abrasion to
enamel and no physical pressure or heat build-up that could
cause discomfort in sensitive patients.
JET Plus Ultrasonic
®
JET Plus Combination
® ™
The Cavitron JET Plus Combination System is equipped with
the Sustained Performance System™ (SPS Technology),
which offers a constant balance between scaling efficiency
and patient comfort by maintaining power when the insert
tip encounters tenacious deposits, allowing the clinician to
effectively scale even at a decreased/lower power setting.
The Cavitron JET Plus System has extended the SPS
technology by expanding the Blue Zone range, providing finer
resolution to the power settings.
Advanced features that make the Cavitron JET Plus a wise
investment include a Tap-On
On™ Technology, Turbo Mode, Prophy Mode Auto Cycles,
illuminated diagnostic display, rinse setting, automated purge
function, JET-Mate detachable sterilizable handpiece, and
™
330˚ swivel handpiece cable with more precise lavage water
control. These features combined with a low power range
(Blue Zone™) and hands-free Boost Mode are designed
to deliver a positive ultrasonic scaling and air polishing
experience for your patients while providing your practice
with the quality and reliability you've come to expect from
Cavitron brand ultrasonic systems.
The Cavitron JET Plus Combination System is UL/ULC
certified and approved. The Cavitron JET Plus Combination
System is classified by Underwriters Laboratories Inc.
with respect to electric shock, fire, mechanical hazards in
accordance with the IEC 60601 Standard. The Cavitron JET
Plus Combination System complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including
interference that may cause undesired operation. Cavitron
JET Plus base FCC certification/registration number: FCC ID:
TF3-DPD81842; IC: 4681B-81842. Cavitron JET Plus Tap-
On Foot Pedal FCC certification/registration number: FCC
TM
ID: TF3-DPD81861; IC: 4681B-81861. The term IC before
the certification/registration number signifies that the Industry
Canada technical specifications were met.

TECHNICAL SUPPORT

For technical support and repair assistance in the U.S., call
the DENTSPLY Professional Cavitron Care
Service at 1-800-989-8826, Monday through Friday, 8:00
A.M. to 5:00 P.M. (Eastern Time). For other areas, contact
your local DENTSPLY Professional representative.
®
SUPPLIES &
REPLACEMENT PARTS
To order supplies or replacement parts in the U.S., contact
your local DENTSPLY Professional Distributor or call
1-800-989-8826, Monday through Friday, 8:00 A.M. to 5:00
P.M. (Eastern Time). For other areas, contact your
local DENTSPLY Professional Representative.
6
Wireless Foot Pedal with Tap-
TM
Factory Certified
SM
* data on file