Honda HSM1180i Manuel De L'utilisateur page 38

Battery electrolyte level
Remove the rear cover and check the electrolyte level in each battery
cell.
Remove the 3 knobs and remove the rear cover by pulling it down.
GROMMETS
PANEL
PROJECTION
KNOB
KNOBS
REAR COVER
Remove the batteries. (Refer to page 69 )
Remove the caps of the battery, then fill the battery with distilled water
to the upper level line. Never overfill the battery.
Any corrosion around the positive and negative terminals should be
washed off with a solution of baking soda and warm water.
Dry the terminals and retighten the terminal bolts if necessary, then
coat the terminals with grease.
DISTILLED WATER
CAPS
UPPER LEVEL
LOWER LEVEL
BATTERIES
After inspection the distilled water level, install the rear cover by
aligning the rear cover grommets with the projections of the body
panel, and tighten the knobs securely.
33