Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Putting Into Service
•
RETRACT – This screen displays the number of hours (On/Off cycles) the Retract solenoid has been operated. This is
the placing tool return cycle. Toggle between HOURS and CYCLES by pressing either the Down or Up Arrow
buttons. Step forward by pressing the MENU button.
•
LOCAL – This screen allows the operator to toggle the LOCAL mode ON or OFF, default is OFF. With LOCAL mode
ON, the shroud buttons replace the placing tool trigger button as the method to operate the pump. In LOCAL mode
the Up Arrow switches the solenoid valve between the two positions and the MOTOR On/Off will start and stop the
motor/pump. Toggle LOCAL mode ON or OFF by pressing the Down (Up) Arrow button. Save setting and step
forward by pressing the MENU button.
Note: For normal operation LOCAL must be set to OFF.
•
LANGUAGE – This screen allows the operator to change the display language by pressing the Down (Up) Arrow
buttons. Save setting and step forward by pressing the MENU button.
16
RETRACT
334
HOURS CYCLES
LOCAL
SET
OFF
ENGLISH
SET
SCREEN 9
SCREEN 10
SCREEN 11
Publicité
Chapitres
Table des Matières
