Packaging; Starting, Operation - WIKA A-10 Mode D'emploi

6. Packaging / 7. Starting, operation

6. Packaging

Has everything been supplied?
Check the scope of supply:
Completely assembled pressure transmitters

Ordered accessories

Inspect the pressure transmitter for possible damage during transportation. Should

there be any obvious damage, inform the transport company and GREISINGER
without delay.
Keep the packaging, as it offers optimal protection during transportation (e.g. chan-

ging installation location, shipment for repair).
Ensure that the pressure connection thread and the connection contacts will not be

damaged.

7. Starting, operation

Required tools: wrench (flats 27), screw driver
Diaphragm test for your safety
It is necessary that before starting the pressure transmitter you test the instrument visual, as
the diaphragm is a safety-relevant component.
Pay attention to any liquid leaking out, for this points to a diaphragm

!
damage.
Use the pressure transmitter only if the diaphragm is undamaged.

Warning
Use the pressure transmitter only if it is in a faultless condition as far as the

safety-relevant features are concerned.
6
Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
GB
A-10